Rose City Yacht Club, a long-standing private marina and social club along the Columbia River in Portland, Oregon, recently took delivery and startup of a new 8-inch Badger Class dredge from Reserve, Louisiana-based DSC Dredge, LLC. The Badger dredge was a much-needed replacement for an older dredge the club had purchased used and had operated for more than 20 years. After extensive research into its options, the yacht club’s members decided in early 2015 to order the Badger Class dredge, which is manufactured at DSC’s Greenbush, Michigan, facility.
HULL PUMP CONVENTIONAL DREDGE
At DSC Dredge, we know designing and building the exact custom dredge that will boost your efficiency and lower your costs involves working with you and learning your story. The Badger Class is a compact dredge, ideal for the smaller dredging jobs where more compact equipment is required due to work area limitations.
The Badger Class is a compact dredge that offers single-truck portability in most areas of the world and is fully functional with just one operator. The Badger is powered by a Caterpillar C7 250 hp (186 kW) diesel engine and can dredge to a depth of 20 feet (6.1 m) below the surface. It has a maximum particle clearance of 4 inches (100 mm) and is available with an 8-inch (200 mm) discharge configuration. Custom features and designs available.
250 hp (186 kW) Caterpillar diesel engine—providing power to the dredge pump, cutter drive and hydraulic winches.
Powerful dredge pump, with service pump for flushing water to the dredge pump packing gland, sending water to the cutter drive bearings and for deck connections.
Three-section hydraulic pump—provides service to the cutter-head motor, swing winches, spud winches and ladder winch.
Cast steel cutterhead, designed with five smooth blades—driven by a hydraulic motor that has variable speed capability and is reversible.
100-gallon (379 l) hydraulic system—protected by relief valves and equipped with replaceable inline filters.
Custom features and designs available.
|Hull Length||42 ft (12.8 m)|
|Overall Length (with ladder)||54 ft (16.5 m)|
|Dredging Depth||20 ft (6.1 m)|
|Hull Depth||3 ft (0.9 m)|
|Hull Width||9 ft, 10 in (3.0 m)|
|Hull Draft (approx.)||1 ft, 6 in (0.5 m)|
|Overall Height (trucking)||9 ft, 2 in (2.8 m)|
|Total Dry Weight (approx.)||38,500 lb (17,464 kg)|
|Diesel Fuel Capacity||150 gal (568 liters)|
J.E. Borries Inc. is a 22-year-old, family-owned, full-service marine construction and dredging company based on the Mississippi Gulf Coast. The company was awarded a project by the Mississippi Department of Marine Resources to complete the dredging of three bayous in and around Gulfport, Mississippi, in an ongoing reconstruction effort following Hurricane Isaac in 2012, which caused siltation along that section of the Mississippi coast. J.E. Borries had previously completed all of its dredging work by mechanical means, using a long-reach excavator or a clamshell friction crane.